过共析钢,hypereutectoid steel
1)hypereutectoid steel过共析钢
1.Ultra-refinement ofhypereutectoid steel during deformation of undercooled austenite;过共析钢在过冷奥氏体形变过程中的组织超细化
2.Effect of processing parameters on dynamic transformation of undercooled austenite ofhypereutectoid steel工艺参数对过共析钢过冷奥氏体动态转变的影响
3.In order to detect the carbide network in high carbonhypereutectoid steel wire rods accurately,two kinds of detection method of the carbide network are compared.为了准确地检验高碳过共析钢盘条中的网状渗碳体,分别对选用硝酸酒精溶液侵蚀和碱性苦味酸钠水溶液热侵蚀两种显示方法进行了比较。
英文短句/例句
1.The Mechanical Behavior of Hypereutectoid Steel with Ultrafine Microduplex Structure超细化球化复相组织过共析钢的力学行为
2.Effect of Aluminum on the Microduplex Structure and Mechanical Properties of Hypereutectoid SteelAl对过共析钢复相组织与力学行为的影响
3.Effect of processing parameters on dynamic transformation of undercooled austenite of hypereutectoid steel工艺参数对过共析钢过冷奥氏体动态转变的影响
4.MICROSTRUCTURE EVOLUTION OF HYPEREUTECTOID STEELS DURING WARM DEFORMATION Ⅰ.Formation of Equiaxial Ferrite and Effects of Al过共析钢温变形过程中的组织演变 Ⅰ.铁素体的等轴化及Al的影响
5.MICROSTRUCTURE EVOLUTION OF HYPEREUTECTOID STEELS DURING WARM DEFORMATION Ⅱ.Cementite Spheroidization and Effects of Al过共析钢温变形过程中的组织演变 Ⅱ.渗碳体的球化及Al的影响
6.Effect of Initial Deformed Microstructures on the Mechanical Properties of Ultrafine Microduplex Structures of Hypereutectoid Steel初始变形组织对过共析钢超细化复相组织力学性能的影响
7.Investigation on Phase Transformation during Severe Plastic Deformation and Aging in Eutectoid Steels;共析钢室温大变形和时效过程相变研究
8.Mechanics Behavior of Buried Corrugated Steel Arch Bridge Based on Soil-Steel Interaction Mode During Construction基于土-钢共同作用模型的覆土波纹钢板拱桥施工过程受力分析
9.Analysis on the shaping in transition driving section and structural optimization design of co-extrusion die of polymer with metal insert钢塑共挤模具过渡拖动段成型分析与模具结构优化设计
10.MICROSTRUCTURE REFINEMENT OF EUTECTOID STEEL BASED ON DIVORCED EUTECTOID TRANSFORMATION基于离异共析转变的共析钢组织细化
11.Analysis of Silicon Increase in Molten Steel During LF Refining Process for SPHCSPHC钢LF精炼过程钢水增硅分析
12.Study on the Microstructure and Texture of the Cold-rolled Eutectoid Steel冷变形共析钢的显微组织与织构探讨
13.Simulation of Wugang Sheet Forming Process and Development of Analysis System;武钢钢板冲压成形过程仿真及分析系统开发
14.Full-Range Analysis of Steel Tube Filled with Steel-Reinforced Concrete Subjected to Concentrically Compression Load钢管钢骨混凝土轴压短柱受力全过程分析
15.ANALYSIS ON SLAG SLOPPING DURING BOF STEELMAKING关于转炉炼钢过程中喷溅现象的分析
16.Nonlinear Full Range Analysis of Special-shaped Concrete Reinforced Columns;钢筋混凝土异形柱非线性全过程分析
plete Analysis of Slender Steel-Concrete Composite Columns by Numerical Simulation;钢-砼组合长柱全过程分析的数值模拟
18.Vibration stability analysis of rolling process of seamless steel tube无缝钢管轧制过程的振动稳定性分析
相关短句/例句
hypereutectoid steel (T10A)过共析钢(T10A)
3)Hype-eutectoid过共释钢
4)Eutectoid Steel共析钢
1.Influence of undercooling on dynamic transformation and microstructure evolution in eutectoid steel;过冷对共析钢动态相变和组织演变的影响
2.Spheroidizing and ultra-refining of structure in eutectoid steel during warm deformation;共析钢温变形过程的组织球化与超细化
3.Formation of proeutectoid ferrite during dynamic transformation of undercooled austenite in a eutectoid steel;共析钢过冷奥氏体动态相变过程中先共析铁素体的生成
5)hypoeutectoid steel亚共析钢
1.Influence of ferrite content on adiabatic shear deformation ofhypoeutectoid steel;铁素体含量对亚共析钢绝热剪切变形的影响
2.Basing on compound principle to simulate the drawing deformation strengthening behavior ofhypoeutectoid steel, the simulation calculation in which the strain distribution is thought can estimate strengthening trend of materials well, which conforms to test results basically and can provide strength design basis for wire ropes production ofhypoeutectoid steel.用试验的方法得到45钢的拉拔强化曲线,基于混合物法则模拟亚共析钢的拉拔形变强化行为,考虑应变分配问题的模拟计算能较好预测材料的强化趋势,与试验结果基本相符,可为亚共析钢钢丝绳生产提供强度设计依据。
3.Spheroidization annealing ofhypoeutectoid steel is a must of cutting-less processing.亚共析钢球化退火是满足无切削加工的必要条件,文中列举了3种实用的热处理工艺。
6)carbon eutectoid steel共析碳钢
1.The Time-Temperature-Transformation relation for thecarbon eutectoid steel is deduced theoretically,based on the theory of diffusion and the theory of the heterogeneous nucleationThe deduction is agreeable to the experimental results据晶体相变的成核理论及晶体原子扩散的计算，定量地推导出了共析碳钢的过冷奥氏体－珠光体转变的时间－温度－相转变开始的函数关系式。
延伸阅读
过共析钢分子式：CAS号：性质：含碳量高于0.77%的碳素钢。显微组织有珠光体和先析渗碳体。该渗碳体沿原奥氏体晶界成网状分布。过共析钢因含有较多的碳、热处理后可得到很高的强度和硬度。通常采用不完全淬火，保留一部分未溶解的渗碳体，淬火后这些渗碳体以粒状分布在马氏体基体内，能提高钢的耐磨性。这种钢多用作工具钢使用。
如果觉得《过共析钢 hypereutectoid steel英语短句 例句大全》对你有帮助，请点赞、收藏，并留下你的观点哦！
