失眠网 > Docker:Nginx-Redis-Mysql-PHP 部署

Docker:Nginx-Redis-Mysql-PHP 部署

时间：2020-05-02 13:53:20

网络桥接

Docker容器之间默认网络隔离，需要使用桥接网络进行互通

创建网络

docker network create net-local

docker network ls

NETWORK IDNAME DRIVER SCOPEda9c8fc3dc80 bridgebridge local786414beb4b3 host hostlocal75b536a6e1ff net-local bridge localac79ba73f784 none nulllocal

容器关联网络: —network [网络名称]

依赖redis和mysql容器，优先启动

Redis

拉取镜像

docker pull redis:latest

启动容器

docker run -itd --name redis-local -p 6379:6379 --network net-local redis

Mysql

拉取镜像

docker pull mysql:latest

docker run -itd --name mysql-local -p 3306:3306 -e MYSQL_ROOT_PASSWORD=123456 --network net-local mysql

PHP

选用7.4-buster版本

docker pull php:7.4-fpm-buster

++注意：alpine版本为了减轻镜像体积，去除了很多命令和扩展，而buster版本中丰富了些基础命令，如：apt++

新建镜像配置文件

FROM php:7.4-fpm-buster#COPY [--chown=www-data:www-data] install.sh kafka_start.sh /tmp/#RUN chmod 777 /tmp/install.sh && /tmp/install.shRUN apt update \# 相关依赖必须手动安装&& apt-get install -y \libfreetype6-dev \libjpeg62-turbo-dev \libmcrypt-dev \libpng-dev \librdkafka-dev \autoconf \automake \libtool \curl \wget \# 生成php源码默认扩展目录&& docker-php-source extract \# 下载predis扩展包&& curl -L -o /tmp/reids.tar.gz "/phpredis/phpredis/tar.gz/5.0.2" \&& cd /tmp/ \&& tar -zxvf reids.tar.gz \&& mv phpredis-5.0.2 /usr/src/php/ext/phpredis \# 安装kafka&& wget /dist/kafka/0.10.2.0/kafka_2.11-0.10.2.0.tgz \&& tar -zxvf kafka_2.11-0.10.2.0.tgz \&& mv kafka_2.11-0.10.2.0/ /opt/kafka \# 安装php-kafka&& wget /arnaud-lb/php-rdkafka/archive/4.0.2.tar.gz \&& tar -zxvf 4.0.2.tar.gz \&& mv php-rdkafka-4.0.2 /usr/src/php/ext/kafka \# 安装扩展&& cd /usr/src/php/ext \# 如果安装的扩展需要自定义配置时#&& docker-php-ext-configure gd --with-freetype-dir=/usr/include/ --with-jpeg-dir=/usr/include/ \&& docker-php-ext-install iconv phpredis pcntl pdo_mysql kafka \# 需要php.ini中配置"extension=mcrypt.so;"&& pecl install mcrypt

按照配置文件建立镜像

docker build -f ~/Documents/Work/Docker/Php/Dockerfile -t php:7.4-fpm-local-buster ~/Documents/Work/Docker/Php/

运行容器

docker run --name php7.4-fpm-local-buster -v ~/Documents/Work/Project:/www -v ~/Documents/Work/Docker/Php/php.ini:/usr/local/etc/php/php.ini --link redis-local:redis --link mysql-local:mysql --network net-local -d php:7.4-fpm-local-buster

Nginx

docker pull nginx:latest

配置文件

server {listen 80;server_name local.api.spm.;#spm-tool/public是映射的主机目录root /usr/share/nginx/html/spm-tool/public;add_header X-Frame-Options "SAMEORIGIN";add_header X-XSS-Protection "1; mode=block";add_header X-Content-Type-Options "nosniff";index index.php;charset utf-8;location / {proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; index index.html index.htm index.php;try_files $uri $uri/ /index.php?$query_string;}location = /favicon.ico { access_log off; log_not_found off; }location = /robots.txt { access_log off; log_not_found off; }error_page 404 /index.php;location ~ \.php$ {fastcgi_pass php:9000;fastcgi_index index.php;fastcgi_param SCRIPT_FILENAME #/www/spm-tool/public/是映射的容器内目录/www/spm-tool/public/$fastcgi_script_name;fastcgi_param APP_ENVlocal; include fastcgi_params;}}

运行

docker run --name nginx-local -p 80:80 -d -v ~/Documents/Work/Project:/usr/share/nginx/html:ro -v ~/Documents/Work/Docker/nginx/conf/conf.d:/etc/nginx/conf.d:ro -v ~/Documents/Work/Docker/nginx/logs:/var/log/nginx --link php7.4-fpm-local-buster:php --link redis-local:redis --link mysql-local:mysql --network net-local nginx

关于参数说明参考Docker教程

容器内安装PHP扩展

进入docker的php容器

docker exec -it php7.4-fpm-local-buster sh

安装扩展

# 生成php源码默认扩展目录docker-php-source extract# 下载源码包至/tmp目录curl -L -o /tmp/reids.tar.gz /phpredis/phpredis/tar.gz/5.0.2cd /tmp/tar -zxvf reids.tar.gz# 将扩展包移至php源码扩展目录mv phpredis-5.0.2 /usr/src/php/ext/phpredis# 进入扩展目录cd /usr/src/php/ext/# 安装predis扩展docker-php-ext-install phpredis pcntl pdo_mysql# 检查php扩展php -m | grep redis

系统置入命令别名

vi ~/.bash_profile

cat ~/.bash_profile

alias ll='ls $LS_OPTIONS -lha'

source ~/.bash_profile

Redis共享网络HOST

进入PHP容器，查看当前ip

/usr/src/php/ext# ifconfigeth0Link encap:Ethernet HWaddr 02:42:AC:12:00:04 inet addr:172.18.0.4 Bcast:172.18.255.255 Mask:255.255.0.0UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1RX packets:40736 errors:0 dropped:0 overruns:0 frame:0TX packets:34103 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:0 RX bytes:48118457 (45.8 MiB) TX bytes:3098250 (2.9 MiB)lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0UP LOOPBACK RUNNING MTU:65536 Metric:1RX packets:18 errors:0 dropped:0 overruns:0 frame:0TX packets:18 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000 RX bytes:1606 (1.5 KiB) TX bytes:1606 (1.5 KiB)

# 此IP为redis链接地址/var/www/html# ping 172.18.0.2PING 172.18.0.2 (172.18.0.2): 56 data bytes64 bytes from 172.18.0.2: seq=0 ttl=64 time=0.583 ms64 bytes from 172.18.0.2: seq=1 ttl=64 time=0.152 ms

对应env.local配置

REDIS_CLIENT=predisREDIS_HOST=172.18.0.2REDIS_PASSWORD=REDIS_PORT=6379TOKEN_REDIS_HOST=172.18.0.2TOKEN_REDIS_PASSWORD=TOKEN_REDIS_PORT=6379

检查运行php的用户

/usr/local/php/php/fpm# php -i |grep userConfigure Command => './configure' '--build=x86_64-linux-musl' '--with-config-file-path=/usr/local/etc/php' '--with-config-file-scan-dir=/usr/local/etc/php/conf.d' '--enable-option-checking=fatal' '--with-mhash' '--with-pic' '--enable-ftp' '--enable-mbstring' '--enable-mysqlnd' '--with-password-argon2' '--with-sodium=shared' '--with-pdo-sqlite=/usr' '--with-sqlite3=/usr' '--with-curl' '--with-libedit' '--with-openssl' '--with-zlib' '--enable-fpm' '--with-fpm-user=www-data' '--with-fpm-group=www-data' '--disable-cgi' 'build_alias=x86_64-linux-musl'ignore_user_abort => Off => Offuser_dir => no value => no valueuser_ini.cache_ttl => 300 => 300user_ini.filename => .user.ini => .user.inibytes_received_change_user_packet => 0packets_received_change_user => 0com_change_user => 0Registered save handlers => files user redis rediscluster user_agent => no value => no valuePHP_EXTRA_CONFIGURE_ARGS => --enable-fpm --with-fpm-user=www-data --with-fpm-group=www-data --disable-cgi$_SERVER['PHP_EXTRA_CONFIGURE_ARGS'] => --enable-fpm --with-fpm-user=www-data --with-fpm-group=www-data --disable-cgi$_ENV['PHP_EXTRA_CONFIGURE_ARGS'] => --enable-fpm --with-fpm-user=www-data --with-fpm-group=www-data --disable-cgi

将代码目录权限更换为www-data

chown -R www-data:www-data /www/spm-tool

将缓存目录赋予777权限

chmod -R 777 /www/spm-tool/storage/framework/cache