耐磨性能,wear resistance
1)wear resistance耐磨性能
1.Investigations ofwear resistance after Supersonic Particles Bombarding in Cr-Zr-Cu surface;超音速颗粒轰击铬锆铜表面耐磨性能的研究
2.Experimental study ofwear resistance of nickel based WC composite coating prepared by flame spraying and remelting+;火焰喷涂重熔Ni基WC复合涂层的耐磨性能试验研究
3.Microstructure andwear resistance of laser clad TiC+Ti and TiC+NiCrBSi composite layers on Ti-6Al-4V alloy;TC4钛合金激光熔覆TiC+M涂层组织和耐磨性能研究
英文短句/例句
1.testing method for abrasion of vulcanized rubber (nbs method)硫化橡胶耐磨性能的测定(nbs磨损机)
2.Study on Abrasion Resistance of Laminate Flooring强化木地板耐磨性能及国产化耐磨纸的研究
3.Microstructure and Wear Resistance of NR400 High Strength Bainite Wear-resistant Steel PlateNR400高强度贝氏体耐磨钢板的组织与耐磨性能
4.testing method for abrasion of vulcanized rubber (akron method)硫化橡胶耐磨性能的测定(用阿克隆磨耗机)
5.testing method for abrasion of vulcanized rubber (william"s method)硫化橡胶耐磨性能的测定（william法）
6.The Contact Fatigue and Wear Resistance of ADI奥贝球墨铸铁的接触疲劳与耐磨性能
7.Influence of Co on the Microstructure and Wear Behavior of High-aluminum Bronze;Co对高铝青铜组织及耐磨性能的影响
8.crock resistance[染色]耐磨擦性能
9.Studies on the Grinding Behavior and Wear Resistance of Y-TZP/Al_2O_3 Ceramics;Y-TZP/Al_2O_3陶瓷磨削性能和耐磨性的研究
10.Solid-Liquid Two-Phase Flow Erosion Wear Properties of Si_3N_4-SiC CompositeSi_3N_4-SiC复相耐磨材料的冲蚀磨损性能
11.Impact Abrasive Wear Resistance of New Type Martensitic Wear Resistant Steel新型马氏体耐磨钢的冲击磨料磨损性能
12.The ability of a garment to withstand prolonged wear.耐磨性衣物经受长时间穿着的性能
13.Influence of Copper on Abrasion Resistance of Wear-Resisting Casting Steel for Mines铜对矿山用耐磨铸钢抗腐蚀磨损性能的影响
14.Study on Abrasive Resistance of Haystellite7 Alloy Coating Prepared by Flame Remelting火焰喷熔Haystellite7合金涂层耐磨粒磨损性能研究
15.Preparation and Solid-Liquid Erosive Wear Property of Sialon-Sic Ceramic CompositeSialon-SiC耐磨陶瓷的制备及液固冲蚀磨损性能研究
16.The specially designed composed formulation provides a good anti-cutting performance.特殊的复合胎面胶配方设计,耐磨耐切割性能好.
17.Microstructure and Properties of Heat- and Wear-resistant Al-Si Alloy Prepared by Spray Deposition;喷射沉积Al-Si系耐热耐磨合金的组织及性能
18.Study on the Microstructure and Properties of a Special Low-Alloy Steel with Wear-Heat Resistance;特种低合金耐磨耐热钢组织和性能的研究
相关短句/例句
abrasion resistance耐磨性能
1.Improvingabrasion resistance of tread compound with zinc oxide whiscker;氧化锌晶须改善轮胎胎面胶耐磨性能的研究
2.The results show that theabrasion resistance and compressive property of PTFE/GF increase markedly after irradiating.结果表明,经电子束辐射后,PTFE/GF的耐磨性能和压缩性能均显著提高。
3)wear-resistance耐磨性能
1.In order to improvewear-resistance of the sucker rod,20CrMo was used as material of experiment samples,alloy and graphite powders were used as material of the layer,an acetylene blowtorch of thermal spray apparatus was used to apply awear-resistance layer to 20CrMo surface.为提高抽油杆的表面耐磨性能,选用20CrMo作为试样材料,采用合金加石墨混合粉末作为涂层原材料,利用氧乙炔热喷涂装置,在20CrMo试样表面上制备出耐磨涂层。
2.Awear-resistance microstructure.结果表明:随着Fe含量增加,Al-Fe复合材料的孔隙率增高,抗拉强度先升后降,伸长率下降,硬度和耐磨性增高,对偶件的减摩性能下降;Al-10%Fe和Al-20%Fe的耐磨性能分别为QSn6。
3.The effects of rare-earth oxide CeO2 on the microstructure and microhardness andwear-resistance and corrosion-resistance of Ni-based metal-ceramic coatings were investigated.采用CO2横流激光器在45#钢基体表面熔覆添加不同含量的稀土氧化物CeO2的镍基TiC金属陶瓷复合层;对熔覆层进行了显微组织观察、显微硬度测量、耐磨性能和耐腐蚀性能测试。
4)wear-resisting property耐磨性能
1.Microstructure andwear-resisting property of TiC particle reinforced coatings claded by TIG welding with multiple layer;多层氩弧熔敷含TiC颗粒增强涂层的微观组织及耐磨性能
2.A comparative study onwear-resisting property of Polypropylene monofilaments for fishing gear;聚丙烯单丝耐磨性能的比较研究
3.The influence of the tempering temperature on hardness andwear-resisting property of hardfacing metal had been discussed.研制出了氮碳合金化自保护硬面药芯焊丝,探讨了回火温度对氮碳合金化自保护硬面药芯焊丝堆焊层硬度和耐磨性能的影响。
5)wearability[英][,w??r?"biliti][美][,w?r?"b?l?t?]耐磨性能
1.The abrasive parts made of polyurethane for making ceramic powder possesses excellentwearability and long life which make no contamination, low noise and save energy.用聚氨酯制造电子陶瓷粉料过程中的各种耐磨件，耐磨性能好，使用寿命长，不污染物料，节能降噪，使用方便，物美价廉。
2.The high temperaturewearability and the mechanism of wearing-resistance of carbon fiber reinforced SiC/phenolic aldehyde sintered alloy were studied and discussed.对碳纤维增强ＳｉＣ/酚醛树脂烧结合金的高温耐磨性能及其耐磨机理进行了详细研究。
3.It has the characteristics of light weight,good wet -proof behaviour andwearability,high usable frequency.它具有重量轻、抗湿性能好、耐磨性能好、使用率高、便于施工和保证混凝土表面质量等特点。
6)wear resisting property耐磨性能
1.In this paper, temperature gradient, pouring temperature and hauling speed were studied using orthogonal testing method, which had effect onwear resisting property of the self-lubricate and high wear resisting aluminum-silicon alloy.采用正交试验法研究温度梯度、浇注温度和牵引速度三个因素对自润滑高耐磨铝硅合耐磨性能的影响。
延伸阅读
耐磨1.经得起磨擦。
如果觉得《耐磨性能 wear resistance英语短句 例句大全》对你有帮助，请点赞、收藏，并留下你的观点哦！
