linux kernel code : kernel/lib/string.c
strsep,strtok,strchr ,strstr ......
PS:本文包含了大部分strings函数的说明,并附带举例说明。本来想自己整理一下的,发现已经有前辈整理过了,就转了过来。修改了原文一些源码的问题,主要是用char *字义字符串的问题,导致程序运行时崩溃。另外自己重写了部分测试程序,使其更能满足自己测试的需要。不当之处,还请海涵。
@函数原型:char *strdup(const char *s)
函数功能:字符串拷贝,目的空间由该函数分配
函数返回:指向拷贝后的字符串指针
参数说明:src-待拷贝的源字符串
所属文件:<string.h>
[cpp]view plaincopy#include<stdio.h> #include<string.h> #include<alloc.h> intmain() { char*dup_str,*string="abcde"; dup_str=strdup(string); printf("%s",dup_str); free(dup_str); return0; }
@函数名称:strcpy
函数原型:char* strcpy(char* str1,char* str2);
函数功能:把str2指向的字符串拷贝到str1中去
函数返回:返回str1,即指向str1的指针
参数说明:
所属文件:<string.h>
[cpp]view plaincopy#include<stdio.h> #include<string.h> intmain() { charstring[10]; char*str1="abcdefghi"; strcpy(string,str1); printf("thestringis:%s\n",string); return0; }
@函数名称:strncpy
函数原型:char *strncpy(char *dest, const char *src,intcount)
函数功能:将字符串src中的count个字符拷贝到字符串dest中去
函数返回:指向dest的指针
参数说明:dest-目的字符串,src-源字符串,count-拷贝的字符个数
所属文件:<string.h>
[cpp]view plaincopy#include<stdio.h> #include<string.h> intmain() { char*src="bbbbbbbbbbbbbbbbbbbb";//20'b's chardest[50]="aaaaaaaaaaaaaaaaaaaa";//20'a's puts(dest); strncpy(dest,src,10); puts(dest); return0; } 输出:[cpp]view plaincopy/******************************************* aaaaaaaaaaaaaaaaaaaa bbbbbbbbbbaaaaaaaaaa *******************************************/ 注意:strncpy只复制指定长度的字符,不会自动在末尾加'\0'。若指定长度超过源字符串长度,不够的部分补‘\0’,
@函数名称:strcat
函数原型:char* strcat(char * str1,char * str2);
函数功能:把字符串str2接到str1后面,str1最后的'\0'被取消
函数返回:str1
参数说明:
所属文件:<string.h>
[cpp]view plaincopy#include<stdio.h> #include<string.h> intmain() { charbuffer[80]; strcpy(buffer,"Hello"); strcat(buffer,"world"); printf("%s\n",buffer); return0; }
@函数名称:strncat
函数原型:char *strncat(char *dest, const char *src, size_t maxlen)
函数功能:将字符串src中前maxlen个字符连接到dest中
函数返回:
参数说明:
所属文件:<string.h>
[cpp]view plaincopy#include<stdio.h> #include<string.h> charbuffer[80]; intmain() { strcpy(buffer,"Hello"); strncat(buffer,"world",8); printf("%s\n",buffer); strncat(buffer,"*************",4); printf("%s\n",buffer); return0; } 注意:与strncpy不同的是,strncat会自动在末尾加‘\0’,若指定长度超过源字符串长度,则只复制源字符串长度即停止
@函数名称:strcmp
函数原型:int strcmp(char * str1,char * str2);
函数功能:比较两个字符串str1,str2.
函数返回:str1<str2,返回负数;str1=str2,返回 0;str1>str2,返回正数.
参数说明:
所属文件:<string.h>
[cpp]view plaincopy#include<string.h> #include<stdio.h> intmain() { char*buf1="aaa",*buf2="bbb",*buf3="ccc"; intptr; ptr=strcmp(buf2,buf1); if(ptr>0) printf("buffer2isgreaterthanbuffer1\n"); else printf("buffer2islessthanbuffer1\n"); ptr=strcmp(buf2,buf3); if(ptr>0) printf("buffer2isgreaterthanbuffer3\n"); else printf("buffer2islessthanbuffer3\n"); return0; }
@函数名称:strncmp
函数原型:int strncmp(char *str1,char *str2,int count)
函数功能:对str1和str2中的前count个字符按字典顺序比较
函数返回:小于0:str1<str2,等于0:str1=str2,大于0:str1>str2
参数说明:str1,str2-待比较的字符串,count-比较的长度
所属文件:<string.h>
[cpp]view plaincopy#include<string.h> #include<stdio.h> intmain() { charstr1[]="aabbc";// charstr2[]="abbcd";// //为使测试程序更简练,此处假定了strncmp只返回-1,0,1三个数 charres_info[]={'<','=','>'}; intres; //前1个字符比较 res=strncmp(str1,str2,1); printf("1:str1%cstr2\n",res_info[res+1]); //前3个字符比较 res=strncmp(str1,str2,3); printf("3:str1%cstr2\n",res_info[res+1]); }
输出:
[cpp]view plaincopy/**************************************** 1:str1=str2 3:str1<str2 *****************************************/
@函数名称:strpbrk
函数原型:char *strpbrk(const char *s1, const char *s2)
函数功能:得到s1中第一个“同时也出现在s2中”字符的位置指针
函数返回:位置指针
参数说明:
所属文件:<string.h>
[cpp]view plaincopy#include<stdio.h> #include<string.h> intmain() { char*p="Findallvowels"; p=strpbrk(p+1,"aeiouAEIOU"); while(p) { printf("%s\n",p); p=strpbrk(p+1,"aeiouAEIOU"); } return0; }
输出:
[cpp]view plaincopy/************************************** indallvowels allvowels owels els **************************************/
@函数名称:strcspn
函数原型:int strcspn(const char *s1, const char *s2)
函数功能:统计s1中从头开始直到第一个“来自s2中的字符”出现的长度
函数返回:长度
参数说明:
所属文件:<string.h>
[cpp]view plaincopy#include<stdio.h> #include<string.h> intmain() { printf("%d\n",strcspn("abcbcadef","cba")); printf("%d\n",strcspn("xxxbcadef","cba")); printf("%d\n",strcspn("123456789","cba")); return0; }
输出:
[cpp]view plaincopy/************************ 0 3 9 ************************/
@函数名称:strspn
函数原型:int strspn(const char *s1, const char *s2)
函数功能:统计s1中从头开始直到第一个“不来自s2中的字符”出现的长度
函数返回:位置指针
参数说明:
所属文件:<string.h>
[html]view plaincopy#include<stdio.h> #include<string.h> #include<alloc.h> intmain() { printf("%d\n",strspn("abcbcadef","cba")); printf("%d\n",strspn("xxxbcadef","cba")); printf("%d\n",strspn("123456789","cba")); return0; } 输出:[cpp]view plaincopy/************************ 6 0 0 ************************/
@函数名称:strchr
函数原型:char* strchr(char* str,char ch);
函数功能:找出str指向的字符串中第一次出现字符ch的位置
函数返回:返回指向该位置的指针,如找不到,则返回空指针
参数说明:str-待搜索的字符串,ch-查找的字符
所属文件:<string.h>
[cpp]view plaincopy#include<string.h> #include<stdio.h> intmain() { char*str="Thisisastring!"; charch; char*p; while(1) { printf("Pleaseinputachar:"); ch=getchar(); p=strchr(str,ch); if(p) printf("%cisthe%dcharacterof\"%s\"\n",ch,(int)(p-str+1),str); else printf("Notfound!\n"); printf("PressESCtoquit!\n\n"); if(27==getch()) break; fflush(stdin); } return0; }
运行结果:
[cpp]view plaincopy/******************************************** Pleaseinputachar:i iisthe3characterof"Thisisastring!" PressESCtoquit! Pleaseinputachar:l Notfound! PressESCtoquit! Pleaseinputachar:s sisthe4characterof"Thisisastring!" PressESCtoquit! **********************************************/
@函数名称:strrchr
函数原型:char *strrchr(const char *s, int c)
函数功能:得到字符串s中最后一个含有c字符的位置指针
函数返回:位置指针
参数说明:
所属文件:<string.h>
[cpp]view plaincopy#include<string.h> #include<stdio.h> intmain() { charstring[15]; char*ptr,c='r'; strcpy(string,"Thisisastring"); ptr=strrchr(string,c); if(ptr) printf("Thecharacter%cisatposition:%d",c,ptr-string); else printf("Thecharacterwasnotfound"); return0; }
@函数名称:strstr
函数原型:char* strstr(char* str1,char* str2);
函数功能:找出str2字符串在str1字符串中第一次出现的位置(不包括str2的串结束符)
函数返回:返回该位置的指针,如找不到,返回空指针
参数说明:
所属文件:<string.h>
[cpp]view plaincopy#include<stdio.h> #include<string.h> intmain() { char*str1="OpenWatcomC/C++",*str2="Watcom",*ptr; ptr=strstr(str1,str2); printf("Thesubstringis:%s\n",ptr); return0; }
输出:
The substringis:Watcom C/C++
char *strcasestr(const char *haystack, const char *needle);
用于在c串haystack中查找c串needle,忽略大小写。如果找到则返回needle串在haystack串中第一次出现的位置的char指针.
在C语言中(string.h)定义了用于进行忽略大小写的字符串比较的函数strcasecmp及strncasecmp
@函数名称:strrev
函数原型:char *strrev(char *s)
函数功能:将字符串中的所有字符颠倒次序排列
函数返回:指向s的指针
参数说明:
所属文件:<string.h>
[cpp]view plaincopy#include<string.h> #include<stdio.h> intmain() { charforward[]="string";//原文中定义为char*是不对的,指向代码段的指针内容是不可变的 printf("Beforestrrev():%s",forward); strrev(forward); printf("Afterstrrev():%s",forward); return0; } 输出:[cpp]view plaincopy/************************************ Beforestrrev():string Afterstrrev():gnirts ************************************/
@函数名称:strnset
函数原型:char *strnset(char *s, int ch, size_t n)
函数功能:将字符串s中前n个字符设置为ch的值
函数返回:指向s的指针
参数说明:
所属文件:<string.h>
[cpp]view plaincopy#include<stdio.h> #include<string.h> intmain() { charstring[]="aaaaaaaaaaaaaaaaaaaaaaa"; charletter='x'; printf("stringbeforestrnset:%s\n",string); strnset(string,letter,10); printf("stringafterstrnset:%s\n",string); return0; }
输出:
[cpp]view plaincopy/************************************************* stringbeforestrnset:aaaaaaaaaaaaaaaaaaaaaaa stringafterstrnset:xxxxxxxxxxaaaaaaaaaaaaa *************************************************/
@函数名称:strset
函数原型:char *strset(char *s, int ch)
函数功能:将字符串s中所有字符设置为ch的值
函数返回:指向s的指针
参数说明:
所属文件:<string.h>
[cpp]view plaincopy#include<stdio.h> #include<string.h> intmain() { charstring[10]="123456789"; charsymbol='c'; printf("Beforestrset():%s",string); strset(string,symbol); printf("Afterstrset():%s",string); return0; }
@函数名称:strtok
函数原型:char *strtok(char *s1, const char *s2)
函数功能:分解s1字符串为用特定分隔符分隔的多个字符串(一般用于将英文句分解为单词)
函数返回:字符串s1中首次出现s2中的字符前的子字符串指针
参数说明:s2一般设置为s1中的分隔字符
规定进行子调用时(即分割s1的第二、三及后续子串)第一参数必须是NULL
在每一次匹配成功后,将s1中分割出的子串位置替换为NULL(摘下链中第一个环),因此s1被破坏了
函数会记忆指针位置以供下一次调用
所属文件:<string.h>
[cpp]view plaincopy#include<string.h> #include<stdio.h> intmain() { char*p; char*buffer; char*delims={".,"}; buffer=strdup("Findwords,allofthem."); printf("%s\n",buffer); p=strtok(buffer,delims); while(p!=NULL){ printf("word:%s\n",p); p=strtok(NULL,delims); } printf("%s\n",buffer); return0; }//根据测试,可以随时给strtok的第一个参数输入一个新的字符串,开始新字符串的分隔
PS:根据测试,可以随时给strtok的第一个参数输入一个新的字符串,开始新字符串的分隔
strsep(),作为strtok的升级版,是一个很有用的字符串处理函数
man strsep:
#include <string.h>
char*strsep(char **stringp, const char *delim);
Be cautious when using this function. If you do use it, note that:
This function modifies its first argument.
This function cannot be used on constant strings.
The identity of the delimiting character is lost.
[cpp]view plaincopy print? #include<stdio.h> #include<string.h> intmain(void) { chars[]="helloworld!"; char*p=s; char*d=""; printf("%s\n",strsep(&p,d)); printf("%s\n",p); return0; } 函数打印如下:helloworld!
@函数名称:strupr
函数原型:char *strupr(char *s)
函数功能:将字符串s中的字符变为大写
函数返回:
参数说明:
所属文件:<string.h>
[cpp]view plaincopy#include<stdio.h> #include<string.h> intmain() { charstring[]="abcdefghijklmnopqrstuvwxyz",*ptr;//会影响原字符串的内存,用char[]来声明 ptr=strupr(string); printf("%s",ptr); return0; }
@函数名称:strlwr
函数原型:char *strlwr(char *s)
函数功能:将字符串中的字符变为小写字符
函数返回:指向s的指针
参数说明:
所属文件:<string.h>
[cpp]view plaincopy#include<string.h> intmain() { charstr[]="HOWTOSAY?"; printf("%s",strlwr(str)); return0; }
@函数名称:strerror
函数原型:char *strerror(int errnum)
函数功能:得到错误信息的内容信息
函数返回:错误提示信息字符串指针
参数说明:errnum-错误编号
所属文件:<string.h>
[cpp]view plaincopy#include<stdio.h> #include<errno.h> intmain() { char*buffer; buffer=strerror(errno); printf("Error:%s",buffer); return0; }
@函数名称:memcpy
函数原型:void *memcpy(void *dest, const void *src, size_t n)
函数功能:字符串拷贝
函数返回:指向dest的指针
参数说明:src-源字符串,n-拷贝的最大长度
所属文件:<string.h>,<mem.h>
[cpp]view plaincopy#include<stdio.h> #include<string.h> intmain() { charsrc[]="******************************"; chardest[]="abcdefghijlkmnopqrstuvwxyz0123456709"; char*ptr; printf("destinationbeforememcpy:%s\n",dest); ptr=memcpy(dest,src,strlen(src)); if(ptr) printf("destinationaftermemcpy:%s\n",dest); else printf("memcpyfailed"); return0; } 输出:[cpp]view plaincopy/************************************************************* destinationbeforememcpy:abcdefghijlkmnopqrstuvwxyz0123456709 destinationaftermemcpy:******************************456709 **************************************************************/
@函数名称:memccpy
函数原型:void *memccpy(void *dest, const void *src, int c, size_t n)
函数功能:字符串拷贝,到指定长度或遇到指定字符时停止拷贝
函数返回:
参数说明:src-源字符串指针,c-中止拷贝检查字符,n-长度,dest-拷贝底目的字符串指针
所属文件:<string.h>,<mem.h>
[cpp]view plaincopy#include<string.h> #include<stdio.h> intmain() { char*src="Thisisthesourcestring"; chardest[50]; char*ptr; ptr=memccpy(dest,src,'c',strlen(src)); if(ptr) { *ptr='\0'; printf("Thecharacterwasfound:%s",dest); } else printf("Thecharacterwasn'tfound"); return0; } 输出:[cpp]view plaincopy/***************************************** Thecharacterwasfound:Thisisthesourc *****************************************/
PS:指定字符被复制到dest中,memccpy返回了dest中指定字符的下一处的地址,返回NULL表示未遇到指定字符
@函数名称:memchr
函数原型:void *memchr(const void *s, int c, size_t n)
函数功能:在字符串中第开始n个字符中寻找某个字符c的位置
函数返回:返回c的位置指针,返回NULL时表示未找到
参数说明:s-要搜索的字符串,c-要寻找的字符,n-指定长度
所属文件:<string.h>,<mem.h>
[cpp]view plaincopy#include<string.h> #include<stdio.h> intmain() { charstr[17]; char*ptr; strcpy(str,"Thisisastring"); ptr=memchr(str,'r',strlen(str)); if(ptr) printf("Thecharacter'r'isatposition:%d",ptr-str); else printf("Thecharacterwasnotfound"); return0; }
memrchr 和上面类似只不过是返回ch的结尾。
@函数名称:memcmp
函数原型:int memcmp(const void *s1, const void *s2,size_t n)
函数功能:按字典顺序比较两个串s1和s2的前n个字节
函数返回:<0,=0,>0分别表示s1<,=,>s2
参数说明:s1,s2-要比较的字符串,n-比较的长度
所属文件:<string.h>,<mem.h>
[cpp]view plaincopy#include<stdio.h> #include<string.h> intmain() { char*buf1="ABCDE123"; char*buf2="abcde456"; intstat; stat=memcmp(buf1,buf2,5); printf("Thestringstoposition5are"); if(stat)printf("not"); printf("thesame\n"); return0; }
@函数名称:memicmp
函数原型:int memicmp(const void *s1, const void *s2, size_t n)
函数功能:按字典顺序、不考虑字母大小写对字符串s1,s2前n个字符比较
函数返回:<0,=0,>0分别表示s1<,=,>s2
参数说明:s1,s2-要比较的字符串,n-比较的长度
所属文件:<string.h>,<mem.h>
[cpp]view plaincopy#include<stdio.h> #include<string.h> intmain() { char*buf1="ABCDE123"; char*buf2="abcde456"; intstat; stat=memicmp(buf1,buf2,5); printf("Thestringstoposition5are"); if(stat)printf("not"); printf("thesame"); return0; } 输出:[cpp]view plaincopy/************************************** Thestringstoposition5arethesame ***************************************/
@函数名称:memmove
函数原型:void *memmove(void *dest, const void *src, size_t n)
函数功能:字符串拷贝
函数返回:指向dest的指针
参数说明:src-源字符串,n-拷贝的最大长度
所属文件:<string.h>,<mem.h>
[cpp]view plaincopy#include<string.h> #include<stdio.h> intmain() { chardest[40]="abcdefghijklmnopqrstuvwxyz0123456789"; printf("destinationpriortomemmove:%s\n",dest); memmove(dest+1,dest,35); printf("destinationaftermemmove:%s",dest); return0; }
PS:与memcpy不同的是,memmove可以处理目的字符串与源字符串地址空间出现重叠的情况,可保证待复制的内容不被破坏。
@函数名称: memset
函数原型: void *memset(void *s, int c, size_t n)
函数功能: 字符串中的n个字节内容设置为c
函数返回:
参数说明: s-要设置的字符串,c-设置的内容,n-长度
所属文件: <string.h>,<mem.h>
[cpp]view plaincopy#include<string.h> #include<stdio.h> #include<mem.h> intmain() { charbuffer[]="Helloworld"; printf("Bufferbeforememset:%s/n",buffer); memset(buffer,'*',strlen(buffer)-1); printf("Bufferaftermemset:%s",buffer); return0; }
如果觉得《C语言中string函数详解》对你有帮助,请点赞、收藏,并留下你的观点哦!